Skip to main content

What a Treasure I Have on My Hands!

After an extremely busy week and weekend of my step-sister's wedding, I was finally able to start stripping my cabinet last night.  Trust me, it took Jeff and I a lot of elbow grease and strength to get the hardware and doors off of this piece.  I started with the cabinet door just to try and get the garish, red paint off of it and was absolutely amazed to see the shadows of an etched design on the glass that was underneath!  I've shown a picture from my cell phone of the first view of the design.  I was seriously giddy...Jeff and the neighbor guy were watching and may have thought I a bit nutty to get so excited over an old cabinet!
This was only the back side of the glass, as the front was still covered in a layer of paint.  I can't believe someone painted over this!  Once it was cleaned up a bit more on both sides, I could see that the etching was still in amazing shape, no scratches that jump out so far.   I need to get my digital camera batteried up so can take some decent pictures.  I will also be adding pictures to show the hideous paint colors that were layered on these poor little doors.  Oh and I had a wicked low during my project, self-induced, as I didn't want to quit working!  Worked myself into a tizzy, I did!  I think I may have to make a temporary "project basal" level to turn on when I'm busy in the garage. 

Comments

Julie said…
Goodness! Can't believe anyone thought it'd be good to cover that up! Looking forward to seeing the finished project.

Popular posts from this blog

Pelmet Tutorial

Finally here it is!  These are super easy, quite quick and don't cost much at all.  Things you'll need: Foam board (use your Micheal's coupons!) Cotton batting-I bought the crib-size and still have leftovers Fabric Glue gun and glue sticks-I used 2 long ones Duct tape Picture hangers or small brackets of your choice Step 1: Measure your window width and cut or tape more than one piece of foam board together to fit the space if needed.  I made sure it was at least 1" beyond each side of the wood moulding.  Remember you'll add thickness and need to attach brackets.  Mine were 64" long, 9" tall and the sides were 2" wide, your proportions may be different depending on the window size and style.  Duck tape holds it all together nicely.  I did add wooden chopsticks to the middle where I taped two long pieces together so it didn't bend.  You won't have to do this if your window is smaller....

Doughnut Low

Being diabetic and having a low blood sugar isn't always a bad thing... Like today when I went for my daily soda there was a little custard-filled, chocolate-glazed, doughnut calling my name.  I bought it with the thought, "I feel like I may be low and I sorta hope I am!"  I was.  BG of 49.  Ha.  Good timing.   It was delicious.  The pudding is my favorite part.    I wonder sometimes if our psyches get the better of us type-1s because having a low = a treat sometimes.  Growing up without being able to eat whenever/whatever treats we wanted, maybe now, subconsciously, our bodies give a little "woo hoo, I'm low, eat something yummy!  Screw those icky glucose tabs!" 

My First 5k!

I have been teaching myself how to run this spring and as motivation, I signed up for the Fitger's 5k , in Duluth, MN this weekend (grew up in the area and still have family and am running with my sister and my Dad's wife).  I haven't been able to really run the full 3.1 miles, as my blood sugars tend to drop if I get my heart rate up too high for too long.  I have found that if I make a point of taking a 1-2 minute break after a mile and then again after each 1/2-3/4 mile and just walk, I don't get so low, as fast.  Inhaling some purple glucose tabs helps a little too. I've only lost 3 lbs.  BUT, I have shrunken down a bit and am not as bloaty-looking around the middle.  Guess that's progress.  I think that when I get back to the lower-heart rate cardio (my beloved elliptical machine) with some high-rate intervals and weights mixed in, the shrinkage will go much faster.  I am participating in our local mega-gym's team training program, which consist...